Dynomotion

Group: DynoMotion Message: 9111 From: tapiolarikka Date: 2/5/2014
Subject: Limitswitches&Konnect?
Hi Tom,

I set my axis limits to Konnect inputs. I can see the input state change with Kmotion digital IO screen but
Axis config screen does not accept bit 1100 as limit input.

Was this supposed to be possible or have I mistaken?

Rgds,
Tapio
Group: DynoMotion Message: 9116 From: Tom Kerekes Date: 2/5/2014
Subject: Re: Limitswitches&Konnect?
Hi Tapio,

What Version are you running?  We recently increased the Bit range for limits beyond 255.  What are you doing exactly and what error do you get?

Regards
TK

Group: DynoMotion Message: 9119 From: Tapio Larikka Date: 2/5/2014
Subject: Re: Limitswitches&Konnect?

Hi Tom,
 
I have KMotion v431r running
 
Rgds
Tapio
 
 
----- Original Message -----
Sent: Thursday, February 06, 2014 1:38 AM
Subject: Re: [DynoMotion] Limitswitches&Konnect?

 

Hi Tapio,

What Version are you running?  We recently increased the Bit range for limits beyond 255.  What are you doing exactly and what error do you get?

Regards
TK

Group: DynoMotion Message: 9122 From: Tom Kerekes Date: 2/6/2014
Subject: Re: Limitswitches&Konnect?
Hi Tapio,

That should work.

What are you doing exactly and what error do you get?

Regards
TK

Group: DynoMotion Message: 9123 From: Tom Kerekes Date: 2/6/2014
Subject: Re: Limitswitches&Konnect?
Hi Tapio,

That should work.

What are you doing exactly and what error do you get?

Regards
TK

Group: DynoMotion Message: 9133 From: Tapio Larikka Date: 2/6/2014
Subject: Re: Limitswitches&Konnect?

Hi Tom,
 
When I change the limit bit from 138 to 1100 and press enter in config it just changes back to 138.
Rgds,
Tapio
 
----- Original Message -----
Sent: Thursday, February 06, 2014 6:50 PM
Subject: Re: [DynoMotion] Limitswitches&Konnect?

 

Hi Tapio,

That should work.

What are you doing exactly and what error do you get?

Regards
TK

Group: DynoMotion Message: 9141 From: Tom Kerekes Date: 2/6/2014
Subject: Re: Limitswitches&Konnect?

Hi Tapio,

Hitting Enter on the Config Screen should close the Screen.  Are you sure that is what you are doing?

How about changing to 1100 then Save Channel ?

Regards
TK