Group: DynoMotion	Message: 5541	From: mrosenfield2	Date: 8/15/2012
Subject: KFlop I/O ports

Tom,
I want to use JP4/6 as inputs for reading axis select switches for my MPG. The manual indicates they are LVTTL, but does not indicate whether they have internal pullup resistors.
Do I need to add pullup resistors?
Thanks,
Michael Rosenfield

Group: DynoMotion	Message: 5542	From: Tom Kerekes	Date: 8/15/2012
Subject: Re: KFlop I/O ports

Hi Mike,

JP4 and JP6 are LVTTL and forcing any IO above 3.8V will cause damage to KFLOP.

The first 8 of 10 IO on both JP4 and JP6 have 150ohm pull down resistors (the remaining 2 IO are high impedance)

If your MPG can be wired to switch them to 3.3V that usually works best.

Regards,
TK

Group: DynoMotion	Message: 5543	From: Michael Rosenfield	Date: 8/15/2012
Subject: Re: KFlop I/O ports

No problem - thanks!

Michael