Group: DynoMotion	Message: 12258	From: fchopinqc	Date: 9/14/2015
Subject: Geo correction file

Hi Tom, Is possible to force a refresh of the geo correction file in KmotionCncn from a KFLOP program? I've developed a program that automatically probe the working surface and produce a geo correction file. I simply would like to update the information in KmotionCnc without a manual intervention... Not to mention also disabling in the init.c the correction values to avoid problem if the file is not updated ;-/

Frederic

Group: DynoMotion	Message: 12260	From: Tom Kerekes	Date: 9/14/2015
Subject: Re: Geo correction file

Hi Fredric,

Here is a patch for KMotionCNC.exe to support a new KFLOP to PC command PC_COMM_RELOAD_GEOCORRECTION.

The Patch should be compatible with V433q

The changed files are here:

http://www.dynomotion.com/Software/Patch/AddKFLOPtoPCCmdReloadGeoTableV433q/

HTH

Regards

Group: DynoMotion	Message: 12264	From: fchopinqc	Date: 9/15/2015
Subject: Re: Geo correction file

works like a charm

thanks...