Group: DynoMotion	Message: 8489	From: Hugh Sontag	Date: 10/17/2013
Subject: Changing the next line of GCode to execute

Is there a way to set the next line of GCode that will execute in KMotionCNC? So that it starts somewhere else than the first line, or so that when a M0 is encountered, a different line. other than the very next line, could be executed next?

Thanks,

Hugh

Group: DynoMotion	Message: 8491	From: Tom Kerekes	Date: 10/17/2013
Subject: Re: Changing the next line of GCode to execute

Hi Hugh,

In the GCode Window right click and select "Set Next Statement".

Regards
TK

Group: DynoMotion	Message: 8492	From: Hugh Sontag	Date: 10/17/2013
Subject: Re: Changing the next line of GCode to execute

Thanks, Tom.

Hugh

On Thursday, October 17, 2013, Tom Kerekes wrote:

Hi Hugh,

In the GCode Window right click and select "Set Next Statement".

Regards
TK