Dynomotion

Group: DynoMotion Message: 2143 From: judrandom Date: 11/6/2011
Subject: Board went out!
Hi Tom
It's been awhile but I am having a big issue with my board. I was working fine for a good while. I took everything apart and moved the machine. When I hooked everything back up everything seemed fine. When I hooked up motor power today the board smoked and went out just like before. I checked all voltages and jumpers and everything looked right. Encoders worked fine before hooking up motor power.
I guess I need to send in my board to get checked out again if that's ok. This couldn't happen at a worse time. Thanks.
Jared
Group: DynoMotion Message: 2144 From: Tom Kerekes Date: 11/6/2011
Subject: Re: Board went out!
Hi Jared,
 
Sorry to hear that.  Send us the board and we will check it out.  Use RMA#13
 
Regards
TK

Group: DynoMotion Message: 2145 From: judrandom Date: 11/6/2011
Subject: Re: Board went out!
Thanks Tom
Will ship tomorrow.
Jared

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi Jared,
>  
> Sorry to hear that.  Send us the board and we will check it out.  Use RMA#13
>  
> Regards
> TK
>
> From: judrandom <judrandom@...>
> To: DynoMotion@yahoogroups.com
> Sent: Sunday, November 6, 2011 2:43 PM
> Subject: [DynoMotion] Board went out!
>
>
>  
> Hi Tom
> It's been awhile but I am having a big issue with my board. I was working fine for a good while. I took everything apart and moved the machine. When I hooked everything back up everything seemed fine. When I hooked up motor power today the board smoked and went out just like before. I checked all voltages and jumpers and everything looked right. Encoders worked fine before hooking up motor power.
> I guess I need to send in my board to get checked out again if that's ok. This couldn't happen at a worse time. Thanks.
> Jared
>