USB Installation Trouble Shooting

If properly installed, a DynoMotion KMotion 2.2 Device should appear under Universal Serial Bus controllers within the Device Manager.

If within Control Panel – System - Device Manager – Universal Serial Bus controllers there is an item “USB High Speed Serial Converter”: This is an incorrect driver, perform the following steps to change the driver:

• Right Click – select “Update Driver”
• Select “Install from a specific location (Advanced)”, then
• Next
• Select “Don’t Search I will choose the driver to install”, then
• Next
• Select “Have Disk”
• Browse to within the directory chosen during the KMotion Installation (Default is C:\KMotion) to subdirectory “USB Driver”
• Select file “ftd2xx.inf”
• Select OK
• Within the Hardware Update Wizard select to highlight “DynoMotion KMotion 2.2 Device”, then
• Next
• Select “Continue
• Select Finish

Within Control Panel – System - Device Manager – Universal Serial Bus controllers, there should now be an item “DynoMotion KMotion 2.2 Device”